RS232 to 4-20mA Converter RS232 to 4-20mA Converter
RS232 to 4-20mA Converter
RS232 to 4-20mA Converter

RS232 to 4-20mA Converter

Product Details:


Product Description

with Modbus,RS485/232 to Analog Current or Voltage Signal Converters,D/A Converter

Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching A/D and D/A Data Acquisition Module,digital signal DI/DO module,analog signal isolated converter,signal conditioners,4-20mA current signal splitter,isolated amplifier(RTD/current/voltage/frequency/speed/potentiometer/pulse),Min-power DC DC converters.Our products also carry the CE approval for safety.

  •  Type No.: WJ31-485-A4   means RS485 interface,4-20mA signal out 
  •  Type No.: WJ31-232-U1   means RS232 interface,0-5V signal out
  •  Type No.: WJ31-485-U1   means RS485 interface,0-5V signal out
  • DIN Rail-mounted
  • RS485/232  to 4-20ma/0-5V analog signal output
  • 12-bit DA converter,analog signal output accuracy>0.2%
  • Can be remotely reconfigured for modules accuracy
  • Three-port Isolation: 3000VDC isolation.
  • Wide power supply range:8~32VDC
  • High reliability, easy program, installation.
  • Can program setting module address, baud rate
  • Support Modbus RTU
  • Intelligent building control, security and engineering applications
  • RS485/232 industrial automation control system
  • Industrial fields signal isolation and long-terms transmission
  • Debugging and control of equipment operation
  • 4-20mA signal output
  • Medical machine monitoring
  • Sensor signal to restore the long-range transmission and signal
  • Industrial field data for a given actuator
Function Description

WJ31 signal isolated D/A converter module, can output one channel voltage/current signals,or 2-channel common ground and isolation current/voltage signals. 

General parameters:

 (typical @ +25 Vs to 24VDC)

  •  Output type: current / voltage signal
  •  Accuracy: 0.2%
  • Output maladjustment: current output  ± 0.5 uA /  C, voltage output of ± 0.1 mV /  C
  • Temperature drift:± 20 ppm / (± 30 ppm /  maximum)
  • Output load capacity: current output  350 (4-20mA/0-20mA/0- ± 20mA current output)
  • voltage output  10mA (0-5V/0-10V/0- ± 5V voltage output)
  • Communication: RS-485 protocol or RS-232 standard characters protocols and MODBUS RTU communication protocol
  • Baud Rate (1200,2400,4800,9600,19200,38400 bps) can be selected via software
  • Address (0 to 255) can be selected via software
  • Communication Response Time: 100 ms maximum
  • Power Supply: +8 ~ 32VDC wide range power supply, internal anti-reverse and over-voltage protection circuit
  • Power Loss: less than 1.5W
  • Operating Temperature: - 45 ~ +80
  • Humidity: 10 ~ 90% (no condensation)
  • Storage Temperature: - 45 ~ +80
  • Storage Humidity: 10 ~ 95% (no condensation)
  • Isolation Voltage: communication interface / output: 3KVDC, 1 minute, leakage current:1mA
Which communication interface and power supply are common ground.
  • Shock Voltage: 3KVAC, 1.2/50us (peak)
  • Dimensions: 106.7 mm x 79 mm x 25mm 



* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

Listen to the Code(Audio Link)

Back to top
WAYJUN INDUSTRIAL AUTOMATION All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.