>>4-CH switch inputs, supports NPN and PNP input
>>Each channel DI can be used as a counter or frequency measurement
>>Supports MODBUS TCP communication protocol
>>The number of pulses per revolution can be set for speed measurement
>>Built-in webpage function, you can check the level status through the webpage
>>The output status can be set through the web page
>>Wide power supply range: 8 ~ 32 VDC
>>High reliability, convenient programming and easy application
>>Standard DIN35 rail installation, convenient for centralized wiring
>>The user can set the module IP address and other parameters on the web page
>>Low cost, small size, modular design
>>Dimensions: 79 x 69.5 x 25 mm
>>Flow meter pulse counting or flow measurement
>>Encoder pulse count
>>Application systems such as intelligent building control and security engineering
>>Ethernet industrial automation control system
>>Industrial field signal isolation and long-term transmission
>>Hall sensor speed measurement
>>Photoelectric sensor level detection and counting
>>Motor speed measurement
>>IoT switch signal acquisition
WAYJUN WJ160 is a Internet of Things and Industrial Ethernet acquisition module, to achieve the formation transparent between sensor and network. It can send sensor data exchange to network.
WJ160-WIFI remote I/O module can be used tomeasure four channels switch signal. It can be used as four channels counter orfour channels frequency measurement..
1. Switchsignal input
4-CH digital signal input, which can be connectedto dry contact NPN and wet contact PNP, details refer to the wiring diagram.
CommunicationInterface: WIFI network interface. It can be connected to WIFI in the LAN.
CommunicationProtocols: supports MODBUS TCP protocols, can achieve industrial Ethernetdata exchange. Also can communication with the module via TCP socket.
NetworkCache: 2K Byte (contains receive and send)
Response Time: less than 10ms
Module internal has transient suppression diodes,can inhibit a variety of surge pulse, protection module.
WIFI: output is WIFI network interface